IKO protect Metatec BTG

Metatec 100 is a high-performance and flexible two- component coating on the basis of methacrylates, that cures when mixed with the correct amount of hardener powder. Next to an exceptionally fast curing, this coating is also characterized by a rapid installation, since the second layer can be applied wet-on- wet on the first layer. Once cured, it forms a waterproof membrane.

Metafleece 110 is a reinforcing membrane in polyester with a density of 110 g/m². This membrane is rolled out and pressed into the still-wet Metatec 100 layer, and ensures the strength, point load and stability of the system on a level substrate. The reinforcing membrane must always be completely embedded into the Metatec 100 layer.

Metatec 200 is a high-performance two-component coating on the basis of methacrylates, that cures when mixed with the correct amount of hardener powder. Metatec 200 is immediately and fully dusted with Dorsilit quartz sand and forms the wearing layer of the system.

Metatec 300 is a high-performance two-component coating on the basis of methacrylates, that cures when mixed with the correct amount of hardener powder. It is used to fix the dustings and as a sealing layer.

MetatecBTG_E

Can be subjected to automotive traffic: very high resistance to static and dynamic loads.
Exceptionally fast installation and curing.
Resistant to continuous water stagnation and oils.
10 year insured warranty upon request.