Superlite rooflights are a range of high quality triple glazed UV protected thermoformed polycarbonate domes and multicell white PVCu upstands. The whole unit U-Value exceeds the requirements of approved document L 2006. The polycarbonate dome is non-fragile and fire rated to Class 1 and Class AA. Suitable for installation in a bituminous membrane, polymeric single ply or mastic asphalt system.

Features and Benefits
  • Extensive range of size, shape and glazing options.
  • Superlite polycarbonate triple glazed rooflights Hot Box Tested achieving a measured U-Value of 1.3 W/M2K when installed with a superlite PVCu 300mm high upstand.
  • Fire performance to Class 1 BS 476 Part 7 and Class AA to BS 476 Part 3.
  • Soft body impact tested to EN1873 and ACR (M) 001:2005 to energy level of 1200J. and Class B, and can be deemed Non - Fragile.
  • Security features include a high security fixing system with optional integral burglar bars.
  • Upstands suitable for bitumen membranes, polymeric single ply and mastic asphalt.
  • Wide range of ventilation and roof access options.
Monopitch

Monopitch (out-of-plane) rooflights are purpose-made continuous rooflights and are available in 0.6m to 6m sloped lengths, and are suited to a curb slope pitch of between 15-75°

Monopitch rooflights are manufactured from proprietary aluminium extrusions.

Available with hermetically sealed glass units or polycarbonate glazing systems the rooflights are installed on site into the aluminium system. Each rooflight run is terminated with either a capping or a wall abutment section.

Pyramid

Pyramid rooflights are purpose-made, self supported rooflights and are available in spans of 0.6m up to 7m, and slope pitch of 15◦ to 60◦ although 30◦ is supplied as standard.

Pyramid rooflights are manufactured from proprietary aluminium extrusions. Available with hermetically sealed glass units or polycarbonate glazing systems the rooflights are installed on site either to a site formed upstand or to a proprietary upstand.

Each rooflight is designed as having four equal sloped sides.

 

Ridgelights

Gable and Hip Ended rooflights are purpose-made continuous rooflights and are available in spans of 0.6m up to 7m, and slope pitch of 15◦ to 60◦ although 30◦ is supplied as standard.

Gable and Hip Ended rooflights are manufactured from proprietary aluminium extrusions. Available with hermetically sealed glass units or polycarbonate glazing systems the rooflights are installed on site either to a site formed upstand or to a proprietary upstand.

Each rooflight run is terminated with glazed gable ends, hipped ends, wall abutments or open ends.

 

Tubular Skylights

These effectively transmit natural daylight to internal rooms or areas that do not receive adequate daylight. Natural daylight is captured at roof level and directed downwards through rigid or flexible tubes and then diffused at ceiling level.